Nova Smt Capabilities

WE CAN ACCOMMODATE PCB SIZES FROM 2 X 2 INCH UP TO 18 X 16 INCH. OTHER SIZES MAY BE POSSIBLE UP TO 22 INCHES ON A CASE BY CASE BASIS.

STENCIL PRINTING

1 –MPM Accuflex, 1 – Juki GKG K2, 1 –My600 Jet Printer.

Minimum Stencil size 650mm x 650mm

Maximum Stencil size 850mm x 850mm

PCB size Min = 80mm x 50mm

PCB size Max = 610mm x 610mm

PLACEMENT:

Juki 3020

Juki 760

Samsung 482 flexible Pick and Place with STF100S Matrix Tray changer

Heller 14-zone reflow ovens

Metcal Scorpion BGA rework station

Inline inspection stations Laser etch machine

REFLOW OVENS

2 – Heller 1707 reflow ovens

7 top zones, 7 bottom zones

Temperature range 25° C to 350° C

Accuracy of temperature control ±.1° C

Min/Max board width 5cm to 45.7cm

Max conveyor speed 188cm/min

SUPER MOLE GOLD THERMAL PROFILER

6 thermocouple inputs

Ovenrider® to verify reflow oven temperature accuracy

MIRTEC MV3 OMNI DESKTOP AOI

15 Mega Pixel camera technology

10 Mega Pixel side view camera technology

10 micron/pixel precision

Full 3D co-planarity and solder fillet inspection

Min/Max board size 50mm x 50mm to 450mm x 400mm

SELECTIVE SOLDER CAPABILITY

1 – Novo™ 103 Selective Solder Machine

Max board size 610mm x 457mm

Dual pump for independent nozzle size and control

Wave nozzle

SWAK-OS for graphics based programming

Solder Pot service cart

BOARD BAKING OVEN

1 –TPS Blue M LO-136 P Laboratory Oven

Multi step Profiling Temperature Controller

Oven for board baking. All boards that go through the reflow ovens get baked first.

BOARD WASHING CAPABILITY

1 – Austin America Aqua-Therm 9200, 1 – Aqueous Technologies AQ400

Aqua-Therm 9200 – Open loop wash, Chem wash, De-I water

AQUATHERM 9200 – water/chemistry capable with 12 programmable recipes.

INSPECTION CAPABILITY

1 – Tagarno FHD Trend, Tagarno HD Uno, 1 – Mantis Elite

FHD- 47X zoom. Take pictures for customer inspection or reference.

HD- 40X zoom, Take pictures for customer inspection or reference.

Mantis- 10X Zoom

X-RAY CAPABILITY

XJ Electronics X-Quick Vi3

Allows X-ray inspection for bottom terminated components such as QFN, LGA, and BGA. Manual inspection for opens, shorts and alignment not visible with optical inspection.

Count parts for accurate inventory control with image pixel technology.

SOFTWARE CAPABILITY

Misys for Manufacturing ERP software

Viewmate Pro

Aegis CircuitCam for offline programing of SMT components

Labelmark 6 Pro

MoleMap

SmartSM

Juki IS Intelligent Shop floor solutions

AOI MV-7 offline teach tool software

AOI Remote Repair Software

Rework Capability

Metcal Scorpion Advanced Rework System

Pre-heater inner zone, Outer Zone reflow head.

Closed loop temperature control

Top & Bottom heaters

Top and Side view high resolution cameras